Thin Wall Coil (MD99-632)

£20.00 exc. VAT

Purchase the 7/8″ Flat Pre-Formed Coil (MD99-632), a heat resistant pre-formed coil for the Mini-Ductor® series.

Includes

  • One (1) 7/8″ I.D. heat resistant pre-formed coil (8.00″ LX 1.125″ O.D.) (1.8 oz.)

Description

Purchase the 7/8″ Flat Pre-Formed Coil (MD99-632), a heat resistant pre-formed coil for the Mini-Ductor® series.

Includes

  • One (1) 7/8″ I.D. heat resistant pre-formed coil (8.00″ LX 1.125″ O.D.) (1.8 oz.)

Mini-Ductor® Venom™
The Newly Designed Mini-Ductor Induction Heater Has Real Bite

The Mini-Ductor Venom generates Invisible Heat® to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4″ nuts are turned red hot in less than 15 seconds.

Features
Venom also includes the following enhancements over the Mini-Ductor II:

Angled Design with Trigger: Venom’s lightweight, ergonomic design allows for induction heat to access hard to reach places more easily
Coil Twist Lock™: coils now lock down with one simple turn (no more thumb screws) and Venom works with all Mini-Ductor coils
LED Usage Indicator: a red LED will light under fault conditions and green LED lights while the trigger is active and the tool is heating properly
Fault Override Delay: any event that causes the red LED to illuminate will protect the tool by starting a three second lock out
Fan Operation Enhancements: the fan continues to run after the trigger is released to aid in thermal cycle time reduction, and will stay powered when the thermal switch opens to aid in cooling the tool
User Controlled LED Switch: as long as the tool is powered and the internal power supply is operating, the LED will remain lit when the switch is on
Two Year Limited Warranty: covers parts and labor
110V (MDV-777) and 220V (MDV-888) models
A New Evolution of Induction Heating
“Venom is a new evolution of the Mini-Ductor Series, which has been the leading hand-held induction heater on the market since it was launched in 2004,” said Tom Gough, President of Induction Innovations. “Venom’s feature set allows users to repair vehicles and equipment faster, safer and more profitably, and to Salvage parts normally discarded.”

Contact us to learn more about the Mini-Ductor Venom

All Inductor® UK products will be shipped by UK Mail delivery services. This is a signed for service. We normally process your order the same day.

A small delivery charge will automatically be added to all orders below £65/€75, this will be calculated during checkout. If you’d like more information, please call us on 01953 859138 or email info@theinductor.co.uk.

FREE Shipping in U.K. on orders over £65 + VAT

UK Shipping: Orders placed before 1.00 pm are usually delivered the next day and will need to be signed for on receipt.

FREE Shipping in Europe on orders over €75 + VAT

European Shipping: Deliveries to Europe take 2-3 working days.

Checking the status of your order

Most orders can be tracked in transit. If you'd like an update on when your order will be delivered, please email us at info@theinductor.co.uk and we'll provide you with the details, where we can.

Additional information

Weight 0.06 kg
Dimensions 25 × 4 × 4 cm